iPhone alarm not going off or making no sound? Every cause and fix
An iPhone alarm that doesn’t ring is usually one of five things: the alarm sound is set to None, the volume is turned down, the time or AM/PM is wrong, the alarm is a sleep-schedule alarm with different settings, or the phone was off. The Silent switch and Focus aren’t on the list. Apple says they don’t stop alarms.
Work through the causes below in order. Each takes under a minute to check.
Quick checklist
| What you notice | Likely cause | Fix |
|---|---|---|
| Phone vibrates, no sound | Sound set to None | Clock, Alarms, Edit, tap the alarm, Sound |
| Faint or no sound | Volume low | Settings, Sounds & Haptics, Ringtone and Alerts slider |
| Rang at the wrong hour | AM/PM, 24-hour time, time zone | Check the alarm and Date & Time |
| Nothing at all | Alarm off, phone off or battery dead | Check the toggle, charge overnight |
| Sound from earbuds, not the phone | Connected audio device | Disconnect it and test |
On an Android phone? See Android alarm not going off.
Nine causes and their fixes
1. The alarm sound is set to None
If your alarm only vibrates, Apple says to make sure the sound isn’t set to None. Open the Clock app, tap Alarms, tap Edit, tap the alarm, tap Sound and choose a sound. Apple lists this as a fix on its alarm support page. If you use a song, see how to change the alarm sound on iPhone, and if it’s an Apple Music song that won’t play, see Apple Music alarm not working.
2. The volume is too low
Apple’s fix: press the volume buttons, or go to Settings, tap Sounds & Haptics and drag the slider under Ringtone and Alerts. The alarm uses that slider, not the media volume. For a full walk-through, including Change with Buttons and the Volume Limit, read why an iPhone alarm is quiet and how to make it louder.
3. The time, AM/PM or time zone is wrong
Check the alarm itself. Is it 7:00 AM or 7:00 PM? Is the toggle next to the time on? You can switch the clock to 24-hour display under Settings, General, Date & Time, Turn 24-Hour Time on or off so AM/PM can’t be misread.
The time zone is set automatically. Apple says you can change it manually if Location Services is off or you have no service, so an alarm can ring at an unexpected hour after travel if the time zone was changed by hand. Apple also says adjusting the time manually to change app behavior isn’t recommended and can affect alarms.
4. You’re looking at the wrong alarm
A sleep schedule in the Health app creates a Wake Up alarm that appears in Clock. It has separate settings, found by tapping Change in the Alarms tab and scrolling to Alarm Options, where you can turn it on, pick the sound and set the volume. If you edit a regular alarm and the Wake Up alarm is the one that failed, nothing changes. Apple’s steps to turn off alarms and delete sleep schedules show where to switch it off or remove it.
5. Silent mode and Focus don’t matter
Apple says Do Not Disturb, the Ring/Silent switch and Silent mode don’t affect the alarm sound. Its iOS 26 guide adds that alarms sound with Silent mode on and with Do Not Disturb or another Focus on. If someone told you to flip the Silent switch to fix an alarm, that isn’t the cause. Airplane mode, headphones and a phone that’s off are covered in does an iPhone alarm go off on silent.
6. Headphones and Bluetooth devices
Apple says that when you connect headphones, the alarm plays at a set volume through the built-in speakers as well as wired and wireless headphones. So the phone speaker should still ring. Some users in an Apple Community thread about iOS 26 report alarms playing through earbuds instead, or not at all. No Apple reply appears in that thread, so treat it as user reports. Test it: turn Bluetooth off in Control Center and set an alarm two minutes ahead.
7. Attention Aware Features
Apple says that with Attention Aware features, when attention is detected, your iPhone lowers the volume of your alerts. Apple’s page says “alerts” and doesn’t name alarms. To switch it off, open Settings, tap Face ID & Passcode, and turn off Attention Aware Features. If you can’t find it, search Settings for “Attention Aware.” In the iOS 26 thread above, one poster’s alarm was fixed by toggling it and another’s sound still worked after turning it back on, so results vary.
8. The phone was off or the battery died
A phone that’s switched off or out of charge can’t ring, so the alarm never gets its turn. Leave the phone on and plug it in overnight.
9. A software problem
If every setting is right and the alarm still fails:
- Update iOS: Settings, General, Software Update. Apple’s update steps cover manual and automatic updates.
- Restart the phone. If it isn’t responding, force restart it: press and release volume up, press and release volume down, then hold the side button until the Apple logo appears.
- Delete the alarm and create a new one with a built-in tone. Users in the iOS 26 thread above report this helped some of them. Apple hasn’t confirmed it as a fix.
When you use StandBy, haptics for your alarms are disabled, so a StandBy phone won’t buzz.
Third-party alarm apps and AlarmKit in iOS 26
Apple’s AlarmKit framework was introduced in iOS 26. Its developer documentation says an alarm overrides both a device’s Focus and Silent mode, if necessary. It also says that if an app doesn’t get authorization to schedule alarms, any alarm it creates isn’t scheduled and doesn’t alert. So with an app built on AlarmKit, check that you allowed alarms when it asked.
Apple’s pages don’t say how apps that don’t use AlarmKit behave. Check each app’s own help to see whether it rings in Silent mode and with Focus on.
Wakemeuper, an alarm app coming soon to iPhone and Android, uses iOS alarms (AlarmKit), so its alarms ring in Silent mode and with Focus on, even if the app is closed or the phone is locked. It needs iOS 26 or later.
If the alarm works but you sleep through it, that’s a different problem. See sleeping through your alarm, or compare options in the best alarm apps for iPhone.
Questions people also ask
How can I test whether my alarm works?
Set a new alarm two minutes ahead with a built-in sound, lock the phone and wait. Test it the way you sleep: with the phone on the charger and any headphones disconnected.
Does Low Power Mode stop my alarm?
Apple’s Power Modes page doesn’t say that it does, and we found no Apple page that says it does. Test with an alarm two minutes ahead while Low Power Mode is on.
Why did my alarm go off at the wrong time after travel?
Check Settings, General, Date & Time. The time zone is set automatically, but it can be changed manually if Location Services is off or you have no service.
Sources
- Apple. “How to set and change alarms on your iPhone.” support.apple.com, accessed November 2026. Read it
- Apple. “Set an alarm in Clock on iPhone.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Change the date and time on iPhone.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Change your wake up alarm.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Turn off alarms and delete sleep schedules.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Turn Attention Aware features on or off on your iPhone or iPad Pro.” support.apple.com, accessed November 2026. Read it
- Apple. “Update iOS on iPhone.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Save battery life with Power Modes on iPhone.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple. “Force restart iPhone.” iPhone User Guide (iOS 26), support.apple.com, accessed November 2026. Read it
- Apple Developer Documentation. “AlarmKit.” developer.apple.com, accessed November 2026. Read it
- Apple Developer Documentation. “Scheduling an alarm with AlarmKit.” developer.apple.com, accessed November 2026. Read it
- Apple Community. “iPhone alarm sound not playing on iOS 26.” discussions.apple.com, accessed November 2026 (user reports, no Apple reply). Read it