Apple Watch alarm not going off or not vibrating? Every check Apple documents
If your Apple Watch alarm didn’t go off, check five things Apple documents: the alarm’s switch, Silent Mode, the haptics setting, the volume, and the Wake Up Alarm in the Sleep app. We found no Apple page about an alarm that fails, so there is no official repair beyond these settings.
These checks come from the watchOS 27 version of Apple’s Apple Watch User Guide and one Apple Support article, which we read on November 20, 2026. For setup, see how to set an alarm on Apple Watch.
Quick checklist
- The alarm’s switch is on.
- Silent Mode is off, or the alarm has Break Through Silent Mode on.
- Haptics isn’t set to Off.
- The volume is not too low.
- In the Sleep app, the Wake Up Alarm has Alarm turned on, and you didn’t tap Skip for Tonight in the Alarms app.
Check the alarm’s switch
Apple’s page Add an alarm on Apple Watch says to turn an alarm on or off by tapping its switch. Go to the Alarms app on your Apple Watch and look at the switch next to the alarm.
Check Silent Mode
Apple says Silent Mode mutes all alerts, notifications and sound effects, and that you still receive haptic notifications. An alarm with no sound can still tap your wrist. So if you hear nothing but feel a tap, Silent Mode fits what Apple describes. Apple’s tip on the alarms page says that to create an alarm that taps your wrist without a sound, you turn on Silent Mode.
To turn it off, Apple says to press the side button to open Control Center, then tap the Silent Mode button.
If you want sound while Silent Mode is on, each alarm has a setting. Go to the Alarms app, tap the alarm time, and turn on Break Through Silent Mode. Apple says this makes sound always play while you’re wearing Apple Watch.
Apple also gives one case where Silent Mode doesn’t matter. Apple’s Silent Mode page says that while Apple Watch is charging, alarms and timers still sound, even in Silent Mode.
With Apple Watch, Wakemeuper can ring in your lightest sleep, inside a window you choose. See how it works
Check haptics if it isn’t vibrating
For an alarm that doesn’t vibrate, start with the haptics setting. Apple’s support article Change the volume, audio, and haptic settings on your Apple Watch says to open Settings, tap Sounds & Haptics, then tap Haptics. The choices are Off, Default and Prominent.
The same article says that for the best haptic results, the back of your Apple Watch needs skin contact. It suggests a snug but comfortable fit. Apple doesn’t say a loose fit stops an alarm.
Apple’s volume and haptics page also lists System Haptics, which turns on or off the haptics for system controls and interactions. It doesn’t say whether that switch affects alarms.
Check the volume
Apple’s volume and haptics page says that Apple Watch can automatically change the volume for ringtones, notifications, alarms and timers based on the noise around you. That setting, Automatically Adjust Volume, is listed for Apple Watch SE 3, Series 9, Ultra 2 and later. In Settings, Sounds & Haptics, you can turn it off and drag the volume slider, up to a maximum of 100%. If it’s on, you can tap Level and choose Default, Louder or Quieter. Apple notes that the volume doesn’t exceed a certain level with that setting on.
Alarm not going off in sleep mode
People say “sleep mode” for different things. Apple documents these:
- The Wake Up Alarm of a sleep schedule. Apple’s page Set up sleep schedules on Apple Watch says to open the Sleep app and tap the Wake Up Alarm button. It says that if you don’t want your Apple Watch to wake you in the morning, you turn off Alarm. So Alarm needs to be on if you want to be woken. That page also says that if you want the alarm to play out loud while Silent Mode is on, tap Break Through Silent Mode.
- Skip for Tonight. In the Alarms app, the alarm below Alarms has a Skip for Tonight button. Apple says it skips that wake-up alarm for just that evening.
- The Sleep Focus. Apple says it turns off the watch display and limits distractions before your scheduled bedtime. Apple’s pages don’t say that the Sleep Focus silences an alarm.
- Do Not Disturb. Apple’s support article says Do Not Disturb keeps calls and alerts (except for alarms) from sounding.
- Cover to Mute. Apple says wake-up alarms are not silenced with the cover to mute gesture, to avoid accidental cancellations during sleep.
With Apple Watch, Wakemeuper can ring in your lightest sleep, inside a window you choose. See how it works
Alarms that come from your iPhone
Apple says that when an alarm is set on iPhone, you can open the Apple Watch app, tap My Watch, tap Clock, and turn on Push Alerts from iPhone. Then your watch alerts you when the alarm goes off. Apple also says you aren’t alerted on your iPhone when your Apple Watch alarms go off. For the phone side, see iPhone alarm not going off.
What Apple doesn’t document
We found no Apple page that lists causes of a watch alarm that fails to go off, or a fix for when every setting above is right. The sleep schedule page says you’re prompted to charge your watch if it’s charged less than 30 percent before bed, but doesn’t say a low battery stops the alarm. If an alarm still fails after these checks, Apple gives no further step. To see which alarms exist and which are on, see how to turn off an alarm on Apple Watch.
Where Wakemeuper fits
Wakemeuper is our own alarm app, coming soon to iPhone and Android. On iPhone it needs iOS 26 or later and uses iOS alarms, which ring in Silent mode and with Focus on, even if the app is closed or the phone is locked. With Premium, Smart wake works with Apple Watch: it finds a light-sleep moment inside a window you choose, and otherwise rings at the set time. Wakemeuper doesn’t track your sleep. Premium is free for 7 days with no card, then $29.99 a year on the US App Store.
Questions people also ask
Why does my Apple Watch alarm vibrate but make no sound?
Silent Mode fits what Apple describes. Apple says Silent Mode mutes all alerts, and you still receive haptic notifications. Turn on Break Through Silent Mode for the alarm if you want sound.
Why does my Apple Watch alarm make sound but not vibrate?
Apple says to check Settings, Sounds & Haptics, Haptics. The choices are Off, Default and Prominent. Apple also says the back of the watch needs skin contact for the best haptic results.
Does Do Not Disturb stop my Apple Watch alarm?
Apple says Do Not Disturb keeps calls and alerts (except for alarms) from sounding. Apple’s pages don’t say how the Sleep Focus treats alarms.
Does a sleep schedule alarm ring in Silent Mode?
Only with the right setting. Apple’s sleep schedule page says to tap Break Through Silent Mode if you want the alarm out loud while Silent Mode is on.
Sources
- Apple. “Add an alarm on Apple Watch.” Apple Watch User Guide, support.apple.com, checked November 20, 2026. Read it
- Apple. “Silence notifications for extended periods on Apple Watch.” Apple Watch User Guide, support.apple.com, checked November 20, 2026. Read it
- Apple. “Adjust volume and haptics on Apple Watch.” Apple Watch User Guide, support.apple.com, checked November 20, 2026. Read it
- Apple. “Set up sleep schedules on Apple Watch.” Apple Watch User Guide, support.apple.com, checked November 20, 2026. Read it
- Apple. “Change the volume, audio, and haptic settings on your Apple Watch.” Apple Support, checked November 20, 2026. Read it